Door Supplies Online

Door Store supplying Interior Doors and Exterior Doors

"Internal & External Doors that are as individual as you are"
01603 62 22 61 [email protected]
View My Order ( items) £0.00
XL Joinery External Oak Chancery Onyx With Brass Caming

XL Joinery External Oak Chancery Onyx with Brass Caming

OptionsPrice
1981 x 762mm £300.10
1981 x 838mm £300.10
Please select sizes below
Only £300.10 ex VAT

XL Joinery External Oak Chancery Onyx with Brass Caming Specification

  • Species: Engineered Oak
  • Construction: Mortise & Tenon 
  • Glazing: Triple glazed feature glass with brass caming.
  • Raised Moulding: Both sides
  • Unfinished
  • All external doors are supplied 44mm thickness
  • XL Joinery External Door finishing guidelines: External doors must have a weatherbar or rain deflector fitted to ensure that water runs away from the face and bottom edge of the door. A drip bead should be fitted to prevent moisture ingress to the top edge of the door, e.g. fitted to the door frame head. In areas of severe exposure, external doors should be protected by a canopy or porch in addition to finishing.
    Bare timber doors will require a light sanding prior to finishing. Take care when finishing glazed doors to ensure that the finish does not go on the glass. Secondary protection such as masking tape may be necessary. When applying the finish pay particular attention to sealing the timber end grain on the tops and bottoms of the doors. Ensure that all lock, letterbox and hinge cut-outs are also finished to the same degree as the timber surfaces.Failure to treat all the timber surfaces may lead to excessive changes in moisture content which will cause the timber to shrink or swell, possibly causing splits and distortion. XL Joinery offer an external door finishing kit for their exterior doors, which can be found here XL Joinery External Door Finishing Kit

    External Doorset Option:

  • Prefinished Doorset option available (with decorative glass not brass caming) in 1981x762mm and 1981x838mm size - please ask for more details